Thermoworks TR-72-UI 2 CHANNEL LOGGERS WITH USB Bedienungsanleitung PDF herunterladen (Seite 19)

Setting Recording Interval from

Main Unit Switch

You can make or change recording interval settings from the "INTERVAL"

switch on the front of the TR-71U

/72U main unit.

1.Press in the [INTERVAL] button on the front of the device until the

recording interval appears in the display.

2.With each pressing of the [INTERVAL] button the recording

interval time will change. Press until the desired setting appears.

《

15 seconds

》《

15 minutes

》

3.When the desired recording interval appears, stop pressing the

[INTERVAL] button. Within a few seconds, the current measurement

readings will return to the display and the setting will be ﬁnished.

- By pressing the [INTERVAL] button during recording or while waiting for a

programmed recording to start, the currently set recording interval will be

displayed.

If Installation Fails

If, during USB device driver installation, some trouble occurs that results in

a failure to install properly, the following display will appear in the Device

Manager.

If this occurs, please re-install from the[USB Device]properties.

How to Re-install

1.In the Device Manager Window, right click on [USB Device] under

[Other Devices] to display the USB Device Properties.

2.In the USB Device Properties Window, click on the [Reinstall Driver]

button to display the Installation Window. Follow the directions to

install.

[

Reinstall Driver

]

button

1 2 ... 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

Thermoworks TR-72-UI 2 CHANNEL LOGGERS WITH USB Bedienungsanleitung Seite 19